Our apartments feature superior-quality materials, modern designs, and energy-efficient solutions. From smart layouts to high-end finishes, every detail at Voora Westside reflects a commitment to excellence.

STRUCTURE

R. C. C. frame structure designed for earthquake resistance - Seismic Zone 3.

Outer walls with 8” thickness and inner partition walls with 4” thickness.

FLOORING & WALL FINISHING

Flooring with quality 4’ X 2’ vitrified tiles for the foyer, living, bedrooms, kitchen and dining areas with 4” skirting.

Toilet tiles are a blend of imported digital tiles.

Toilet flooring will be of firm foot – grip tiles.

Wash area will be of ceramic tiles, provided up to the parapet wall height or will be in line with kitchen dado.

20mm. black granite slab will be provided for kitchen cooking platform with 8" x12" ceramic dado (2' above counter)

PLUMBING AND SANITARY FITTINGS

Concealed copper wiring with Legrand/Crabtree or equivalent modular switches.

HT connection with internal metering for units.

Separate meter for lighting in common areas, lift and pumps.

3-phase will be provided for each flat.

15-amps power plug sockets will be provided for water heaters in the bathrooms and for air conditioners in the bedrooms.

One 5-amp socket will be provided for each room, except in the living room in addition to a multiple socket with 3 outlets will be provided for connection to TV etc.

2-way switches will be provided for fans and lights in all bedrooms.

Two 5-amp sockets and one 15-amp socket will be provided in the kitchen.

One bell point will be provided.

Fan points in living room, dining and bedrooms.

Light points, in living, dining, bedrooms, kitchen, washing area and balcony.

COMMON AREA FLOORING

Ground floor entrance and lift lobbies will be of imported tiles.

Typical floor lift lobbies will be of imported tiles.

Staircase will be of restile/equivalent flooring.

Corridors will be of vitrified/ceramic

DOORS

Main door frame will be of polished Teak wood frame with both sides laminated flush door shutter with Godrej highly secured digital locks.

Other doors will be of good quality wooden frames with both sides laminated flush door shutter.

All door fittings will be SS fittings.

WINDOWS AND VENTILATORS

MS Grills (painted) will be provided for all windows.

Windows and ventilators will be of UPVC casement fitted with 4mm. thick glass as per builder’s choice.

PAINT

Ceiling painting will be of OBD over putty.

Putty with acrylic emulsion for interior walls will be of Asian Paints or equivalent.

Enamel paints for MS Grills.

Exterior walls painted with weather-shield paint, Asian Paints or equivalent.

Melamine matte finishes paint for main door.

Enamel paint for other doors.

PLUMBING AND SANITARY FITTINGS

All ceramic fittings will be of EWC and wash basins will be of white Hindware or equivalent.

Provision for hot water connection in individual heater of 15ltrs. capacity for each bathroom.

Hot and cold mixers for shower and tap in each bathroom will be of Hindware CP fittings or equivalent fittings.

Concealed plumbing lines from the overhead tank for each floor.

Single bowl stainless steel sink with drain board in the kitchen.

ELECTRICAL FITTINGS

DG backup for 2 BHK – 750watts single phase complete lighting fan and 6A socket load with TV through ACCL.

DG backup for 3 BHK – 1000watts single phase complete lighting fan and 6A socket load with TV through ACCL.